Development of operational requirements for self-propelled combine harvesters with the capabilities of mobile energy resources

dc.contributor.author V. Sheichenko
dc.contributor.author A. Kuzmych
dc.contributor.author V. Niedoviesov
dc.contributor.author M. Aneliak
dc.contributor.author O. Bіlovod
dc.contributor.author V. Shevchuk
dc.contributor.author T. Kutkovetska
dc.contributor.author N. Shpilka
dc.date.accessioned 2021-02-15T17:34:45Z
dc.date.available 2021-02-15T17:34:45Z
dc.date.issued 2020
dc.description The theoretical dependences have been derived of the motion speed, the power on a hook, the specific fuel consumption, as well as a factor of loading the wheels of the driven axle, on the traction force on the hook of an energy-technological device.It is noted that the use of the controlled axle with drive wheels reduces the slippage of the engines of the energy technological device. At the engine slippage level of up to 16 % anenergy device, equipped with a driven axle with drive wheels, generates a traction force on the hook of up to 40 kN. Under the conditions of driving the axle by the hydraulic transmission mainline, the motion speed of an energy device decrea-ses by 17.9 %, 28.5 %, 35.9 %, and 49.0 %, respectively, on gears I, II, III, and IV of the drive axle gearbox.The power on the energy device’s hook is increased due to the corresponding increase in traction effort: on gear III, at a trac-tion effort within 35–40 kN, the capacity on the hook is 68–75 kW. Under these condi-tions, the specific fuel consumption is 430–460 g/kWh at the device’s motion speed within 1.9–1.95 m/s. The limits for changing the load factor on the wheels of the driven axle (not less than 0.2) have been determined, at which the requirements for control over an energy device are met.The specific fuel consumption (540–580 g/kWh) by a combine-harvester with a throughput capacity of 9–11 kg/s has been established, when using it as an energy technological device for general purposes at a motion speed of 1.7–2.1 m/s and a traction effort on the hook of 24–33 kN uk_UA
dc.description.abstract This paper reports a study into the possibility of using the chassis of com-bine-harvesters as a mobile energy device. The operational requirements for mobile energy technological devices for general purposes have been developed.The traction-coupling characteristics of the combine-harvester with an adap-ter that increases traction force have been investigated. uk_UA
dc.identifier.citation 4. V. Sheichenko, A. Kuzmych, V. Niedoviesov, M. Aneliak, O. Bіlovod, V. Shevchuk, T. Kutkovetska, N. Shpilka Development of operational requirements for self-propelled combine harvesters with the capabilities of mobile energy resources. Eastern-European Journal of Enterprise Technologies. 2020. Vol. 6. No 6 (107). P. 60-70 uk_UA
dc.identifier.issn ISSN 1729-3774
dc.identifier.uri http://lib.udau.edu.ua/handle/123456789/7626
dc.language.iso en uk_UA
dc.publisher Eastern-European Journal of Enterprise Technologies. 2020. Vol. 6. No 6 (107) uk_UA
dc.relation.ispartofseries Vol. 6. No 6 (107);
dc.subject combine-harvester uk_UA
dc.subject energy technological device uk_UA
dc.subject operational requirements uk_UA
dc.subject traction-coupling properties uk_UA
dc.subject adapter uk_UA
dc.title Development of operational requirements for self-propelled combine harvesters with the capabilities of mobile energy resources uk_UA
dc.type Стаття uk_UA
Файли
Вихідний пакет
Зараз показується 1 - 1 з 1
Немає доступних мініатюр
Ім'я:
212788-Article Text-484694-1-10-20201021.pdf
Розмір:
648.93 KB
Формат:
Adobe Portable Document Format
Опис:
Набір ліцензій
Зараз показується 1 - 1 з 1
Немає доступних мініатюр
Ім'я:
license.txt
Розмір:
7.54 KB
Формат:
Item-specific license agreed upon to submission
Опис: